“BURN RISE ENJOY THE VIEW” is a DIY text effect created with FontVibe AI.

Create a 3:2 cut-out automotive decal design with only three exact text lines: “BURN”, “RISE”, “ENJOY THE VIEW”. Build a clear three-tier hierarchy for rear-window or body-panel viewing distance. “BURN” is the dominant top-left headline, broad and heavy, occupying roughly the left half of the upper field. “RISE” sits below it, shifted noticeably right while remaining slightly narrower than BURN, creating a rising stepped rhythm. Place a thin horizontal molten-metal rule across the composition just above the final line. Set “ENJOY THE VIEW” beneath the rule, starting at the same left edge as BURN and spanning most of the width in compact widely tracked small caps. In the upper-right negative space, add a tall narrow vertical cluster of fused ember fragments and sparks; it must not read as extra text. Custom-draw every letter as forged steel retrieved from a furnace: thick condensed all-caps forms, squared shoulders, blunt cut terminals, tight industrial geometry, shallow bevels and slightly eroded outer contours. The visible letter mass must be luminous rather than black: bone-white hot steel faces, pale amber edge planes, orange-red fissures branching finely through each stroke, and deep burnt-red heat pockets inside recessed cracks. Hairline fracture networks follow the stroke direction; sharp yellow-orange rim light catches every chipped edge. Tiny glowing cinders, short upward sparks, and sparse smoke wisps are physically attached to the letter edges and fragment cluster only. Use #E9E2D0, #FFB13B, #E84A16, #5B1D0E and restrained charcoal-detail lines #11110F within the luminous forms. Crisp decal-ready silhouette, sharp high-resolution edges, no mockup, no vehicle, no additional words, no symbols, no background elements.