“Consagra ao SENHOR todas as tuas obras e os teus planos serão bem-sucedidos. Provérbios 16:3 | KJA” is a Laser Cut text effect text effect created with FontVibe AI. Bold sans capitals cut from warm birch wood with charred kerf edges and visible grain, raised from a dark walnut board under amber side light.

Precision fabrication aesthetic: text exists as physical cut material — not rendered, not painted. The laser kerf is the only boundary: mathematically exact edges, zero roughness. MATERIAL SURFACE RULES: — Wood: warm grain on letter face (birch honey or dark walnut); charred dark seam along every kerf edge; cross-grain cross-section at cut face. Gentle warm transmission through thin sections. — Acrylic: glassy-smooth kerf edges scatter light as luminous halos — frosted emits soft white-blue edge glow; clear creates prismatic edge-light. Face stays matte or polished. — Metal: bright machined cut face against brushed exterior. Raking light reveals mechanical precision and directional grain. — Paper/Organic: bone-clean cut edges casting hairline shadows on backing. Maximum filigree detail preserved. FABRICATION LAWS (all materials): — Enclosed counters (O,D,B,P,R,A) retained by structural bridge connections — thin material tabs turned into design features. — Material thickness always visible as dimensional depth: each letter is a physical slab. — Negative space is real air or backing material showing through. — No added outlines, glow effects, or drop shadows — the kerf edge is the only boundary. FORBIDDEN: graphic fills, smooth gradient fills on letter faces, extruded 3D depth. When no specific material is defined by the font: default lighting — warm amber side light raking from low-left, deep warm shadow on right and behind, dark warm-brown craft-studio background. Physical devotional wall plaque laser-cut from a single slab of dark walnut, carrying the exact text: “Consagra ao SENHOR todas as tuas obras e os teus planos serão bem-sucedidos. Provérbios 16:3 | KJA”. The verse is the dominant cut-through element, with “SENHOR” given stronger visual weight through scale and spacing; the citation is smaller, precisely cut as a quiet reference line. Every letter is a real void through the walnut, revealing a warm ivory linen-backed panel beneath. Enclosed counters are retained by narrow, deliberate bridge tabs, especially within the rounded characters, treated as visible fabrication details rather than hidden supports. The walnut face shows tight dark-brown grain and a low-sheen oiled finish; each laser kerf carries a narrow charcoal-black char seam, while the 8 mm slab thickness exposes crisp cross-grain cut faces. Low amber sidelight rakes across the wood from the lower left, revealing the dimensional slab edge and casting fine natural contact shadows onto the linen backing. A restrained branch of dried olive leaves enters the surrounding negative space in soft focus, its matte sage-gray texture echoing the devotional setting. Dark warm-brown timber and subdued linen fibers form the surrounding studio environment, with no printed ink, painted fills, outlines, glow, or extruded depth.