“DR. NINA SHAH OFFICE OF” was created with FontVibe AI — explore more Laser Cut text effect. Bold sans capitals cut from warm birch wood with charred kerf edges and visible grain, raised from a dark walnut board under amber side light.

Create a finished horizontal office name plaque, viewed straight-on with a slight angle that reveals its physical thickness. The plaque is a broad, precisely laser-cut warm honey-birch panel mounted on a dark walnut backing, against a dark timber workshop surface. The birch face has fine natural grain; every cut edge shows cross-grain and a narrow charred kerf seam. The real cutout spaces reveal walnut behind the face. Make the panel and lettering visibly substantial, with clean, mathematically exact edges and no roughness. Set exactly two lines of text, centered and carefully spelled: small uppercase "OFFICE OF" above the dominant name "DR. NINA SHAH". Use bold, robust stencil display lettering with uniform strokes, angular shear-cut terminals, and clear structural bridges across enclosed counters, including the D and A forms. Keep every bridge visibly connected and intentional. The name is the clear focal point; the smaller descriptor is evenly spaced above it. Ensure the lettering is crisp and highly legible. Warm amber light rakes from low left across the birch grain, revealing the slab depth and fine directional shadows at the kerf edges; let the right side fall into deep warm shadow. Keep the setting quiet and uncluttered: plaque, walnut backing, timber surface, and light only. No extra text, symbols, ornaments, added outlines, glow, drop shadows, painted or gradient letter fills, or extruded effects.