“CUT” is a Laser Cut text effect text effect created with FontVibe AI. Bold sans capitals cut from warm birch wood with charred kerf edges and visible grain, raised from a dark walnut board under amber side light.

Precision fabrication aesthetic: text exists as physical cut material — not rendered, not painted. The laser kerf is the only boundary: mathematically exact edges, zero roughness. MATERIAL SURFACE RULES: — Wood: warm grain on letter face (birch honey or dark walnut); charred dark seam along every kerf edge; cross-grain cross-section at cut face. Gentle warm transmission through thin sections. — Acrylic: glassy-smooth kerf edges scatter light as luminous halos — frosted emits soft white-blue edge glow; clear creates prismatic edge-light. Face stays matte or polished. — Metal: bright machined cut face against brushed exterior. Raking light reveals mechanical precision and directional grain. — Paper/Organic: bone-clean cut edges casting hairline shadows on backing. Maximum filigree detail preserved. FABRICATION LAWS (all materials): — Enclosed counters (O,D,B,P,R,A) retained by structural bridge connections — thin material tabs turned into design features. — Material thickness always visible as dimensional depth: each letter is a physical slab. — Negative space is real air or backing material showing through. — No added outlines, glow effects, or drop shadows — the kerf edge is the only boundary. FORBIDDEN: graphic fills, smooth gradient fills on letter faces, extruded 3D depth. When no specific material is defined by the font: default lighting — warm amber side light raking from low-left, deep warm shadow on right and behind, dark warm-brown craft-studio background. Workshop flat-lay: 'CUT' laser-cut from thick dark walnut board, three bold letters occupying the dominant zone of the frame, each letter a physical slab of richly grained hardwood. Raking amber key light from low-left at a shallow 18-degree angle slices across the surface — every kerf edge throws a precise, hard shadow line revealing the full 8mm material depth on the right face of each letterform. The cut face exposes the fine cross-grain honey-amber heartwood interior in sharp contrast to the near-black char seam that borders every boundary with machined exactness. The enclosed counter of the U is bridged by two clean structural tabs — narrow walnut material connections flush with the letter face, turned into a deliberate design feature. Negative space punches through to the dark raw-timber workshop surface beneath, a deep warm-brown grain fading to near-black at the frame edges. No added glow, no fill, no drop shadow — only the char edge, the grain, and the raking light defining every form. The atmosphere is pure fabrication: a single cut piece on a dark workbench, lit hard, photographed close.