“FACET LAB” is a Laser Cut text effect text effect created with FontVibe AI. Bold sans capitals cut from warm birch wood with charred kerf edges and visible grain, raised from a dark walnut board under amber side light.

Create a clean-cut jewelry brand logo in a horizontal 3:2 lockup. Render only the exact text “FACET LAB”, with a compact geometric faceted-gem cutout mark placed to the left. The mark is a six-plane gemstone silhouette laser-cut through the same metal, with real backing visible in its facets; it occupies 18% of the lockup width. Set “FACET” above “LAB”, aligned left to the gem mark’s inner edge. Use bold stencil-display lettering: robust uniform strokes, wide proportions, tight measured tracking, angular shear-cut terminals, and deliberate narrow bridge tabs at every enclosed counter and cut opening. The wordmark is fabricated from 3 mm brushed platinum-toned stainless-steel slabs, not printed type: satin brushed faces with fine horizontal directional grain, bright machined silver cut faces, exact dark kerf seams, and visible slab thickness along the lower-right edges. Bridge gaps are physical cut slots exposing the backing. No outlines, no gradient fills, no glow, no drop shadows, no extruded 3D type. Place the physical lockup centered with 20% clear margin on all sides, on a near-black walnut workshop backing board with subdued straight grain. A narrow cool-white raking key light enters from upper left at 20 degrees, producing hairline shadows immediately to the lower right of every cut edge and controlled metallic highlights on the machined faces. Keep the scene flat-lay and front-facing, precise fabrication photography, high-resolution product mark study. No additional text, ornaments, gemstones, chains, hands, or mockup objects.