“CANDLE FLAMES” was created with FontVibe AI — explore more Drip Font Melting text effect. Glossy orange-red letters liquefying from the base down, with molten drips, warped lower edges and a glowing puddle on a dark charcoal floor.

A wide banner. The words "CANDLE FLAMES" in one single line run across the canvas in huge bold slab-serif display capitals, filling about 88% of the banner width and centred slightly above the middle so the drips have room below. The letters are hot paraffin wax melting under extreme heat. Top edges of every letter stay crisp and sharp, while the lower two-thirds swell outward 15-20% into soft rounded molten mass and flow downward. Colour runs from bright yellow-orange at the peak highlight, through vivid orange #FF6B2B at the active drip zone, to deep amber-red #CC3300 at the base. The surface is high-gloss convex wax skin with a broad orange-yellow specular arc on each letter, never white. Warm orange subsurface glow shows just inside the skin. Three tiers of drips descend from the letters: two or three thick primary streams with a slight bulge at their origin and a teardrop end, several medium streams, and fine capillary trails between them, with visible surface-tension necks. The drips are laminar and uneven in length, and the longest reach about 30% of the banner height. At the bottom edge a thin viscous pool of molten wax gathers and spreads, with a faint wet sheen and a few small round droplets that have fallen. The background is deep charcoal #1A1614 with a faint warm amber glow radiating from the lettering and a soft darker vignette at the far corners. A single intense overhead key light casts a sharp soft-edged shadow to the lower right of the letters and the drips. No other text, no props, no candle objects. The melting lettering is the only subject.